标准光？
SFP28光？椴馐园
Description
测试板特点
● 专业仿真团队设计 ，信号质量优异
● 支持 SFP28 和 SFP+光？榈牟馐
● 支持 4V 或 3.3V 供电
● USB 接口直接会见？
● 可使用电源适配器直接供电
● 支持板上电流检测
接口说明
◆ SFP28 接口（J002、J001）
J008 为 SFP28 光？榈谋曜冀涌,测试时将光？榻尤敫媒涌 。
◆ 电源接口（J3、J6）
J002电源接口
J002电源接口有两个管脚,管脚界说如下:
J001电源接口可利便电源适配器供电,讨论支持 5.5*2.5mm 和 5.5*2.1mm 。
◆ USB 接口（J004）
测试板的 USB 接口接纳 USB 类型 B 插座 ，毗连性更为可靠 。
USB类型B插座
◆ 控制接口口（J007、J009、J005、J006）
输入电源选择接口
J007、J009 用于选择供电电压 ，当用 3.3V 供电时 ，将 J007、J009 的跳线帽都接到丝印为“3.3V”一侧 ； 当用 4V 供电时 ，将 J007、J009 的跳线帽都接到“4V”一侧 ，其管脚界说如下：
◆ I2C 接口（J006）
I2C接口
当不希望通道 USB 接口会见？槭 ，可直接通过 J006会见？ 。注重 ，此时需要断开 USB 毗连 。J006 的管 脚界说如下：
Share this product
Related Products
FT-62-U3HC02AR 高速集线器
FT-62-U3HC02AR 高速集线器
与通俗USB3.0集线器相比,该款产品可将毗连于下行端口的USB2.0/1.1/1.0装备的传输转化为USB3.0 SuperSpeed 传输,并允许其分享SuperSpeed上行带宽 。 基于SuperTT手艺,FT-62-U3HC02AR只接纳上行端口的高速传输通道,可使用有源光缆利便地将USB 2.0/1.1/1.0装备的传输距离扩展至100米以上 。
10Gb/s SFP+ 1550nm 120km Optical Transceiver Module
10Gb/s SFP+ 1550nm 120km Optical Transceiver Module
F-tone Networks's 10Gb/s SFP+ 1550nm 120km Optical Transceiver Module： SFP+ optical transceivers are designed for use in 10Gb/s data rate over multimode fiber. They are compliant to SFF-8472 Rev 12.1 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2011/65/EU and F-tone Networks Application Note FTAN-2015038.
F-tone Networks 100G CFP2 to QSFP28 Adapter
F-tone Networks 100G CFP2 to QSFP28 Adapter
F-tone Networks’sF-tone Networks 100G CFP2 to QSFP28 Adapter are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Breakout to SFP+ Cage Converter and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details
F-tone Networks 100G CFP to QSFP28 Adapter
QSFP+ Extender (up to 80KM or I00KM)
F-tone Networks’s QSFP+ Extender (up to 80KM or I00KM) are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable
100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable
F-tone Networks’s 100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
QSFP28光？椴馐园
测试板特点
● 专业仿真团队设计 ，信号质量优异
● 支持 QSFP28 和 QSFP+光？榈牟馐
● 支持 4V 或 3.3V 供电
● USB 接口直接会见？
● 可使用电源适配器直接供电
● 支持板上电流检测